108 Appendix
WAGO-I/O-SYSTEM
750
750-657 IO-Link Master
Manual
Version 1.0.2, valid from FW/HW-Version 02/01
11.3.1
"IOL-M Basic Configuration" Record
The "IOL-M Basic Configuration" record contains information and configuration
data from the IO-Link master. The record can read or written via the Mailbox,
parameter access service "IOL_CALL" (see section "Parameter Access Service
"IOL_CALL"):
Table 74: “IOL-M Basic Configuration“, Access
Entity Port FI_Index
IOL-Index
Description
0 65098
dez
0x0100
IOL-M Basic Configuration
Execute "CommitPendingChanges" to apply values!
To apply the records written to the I/O module, execute the "CommitPending-
Changes" command via the command register (see section "Command Register").
For retentive memory, then execute the "SaveUserSettings" command.
The following table provides an overview of the data fields of the IOL-M record
"Basic Configuration".
Table 75: Data record “IOL-M Basic Configuration“
No Offset ID
Access
User
Access
Factory
Default
value
Size
(byte)
Active
0
0
NO_CHANNEL ro ro 4 1 -
2
1
COM_MODE ro ro 3 1 -
26 2
MASTER_MIN_CYCL ro
ro
0x11
1
-
27 3
IOL_REV
ro
ro
0x11
1
-
28
4
IOLM_FEATURE
r/w
r/w
2 2 Start-up
29
6
IOLM_RESERVED
r/w
r/w
0 2 Start-up
31 8
IOLM_PAB_STRUCT r/w
r/w
s.u.
37
Start-up
The individual fields are described below.
11.3.1.1 NO_CHANNEL
The NO_CHANNEL data field returns the number of available IO-Link-enabled
ports of the I/O module.
Table 76: IOL-M Basic Configuration, NO_CHANNEL
Name
Data type
Access
Value
NO_CHANNEL UNSIGNED8 ro
0x04
