RC40 Control manual
54
e0x0003 Fail to read file size
Trying to read a nonexist file,
or the path does not exist, or
the file is corrupted
Check the files again within
the controller in file
synchronization to make
sure the current file list is up
to date, and try
resynchronization if it
doesn't exist or is corrupted
e0x0004 Syntax error
The program running in the
controller has a syntax error
Check for syntax errors and
modify the program
according to the error line
number and prompt
message
e0x0005
Wrong path to
program main file
The path does not exist and
the file cannot be read
Check to see if the files
exist and try to
resynchronize the project
files
e0x0006
There is no robot
instance
Failed to create robot
instance, unable to start
interpreter
Check to see if the program
file exists and if an
exception occurred, clear
the error first, and then try
again
e0x0007
Already exists one
robot instance
The interpreter is not closed
properly
Contact technical support
e0x0008
Fail to run the
program because
of syntax error
There is a syntax error in the
program
Modify the syntax error in
the program according to
the alarm line number and
prompt message and then
run again;
