ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
DP module 12: extended command channel
Commands in the extended command channel
306
11.3.34
Module 12, extended command 102 (66hex) – user menu
5801
Request from fieldbus master to device
Bit
Offset
Word no.
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
1
res. = 0
M
UID
command number = 102
dec
= 66
hex
2
reserved = 0
reserved = 0
3
reserved = 0
command number
4...18
parameter (depending on the command number)
or: not used
Legend:
M
master no.
1 bit
0 = master 1
1 = master 2
UID
user ID
5 bits
00…1F
hex
= 0…31
dec
(a change to the user ID starts the command call)
command number
1 byte
01 = reads the current menu status
02 = jumps to the start menu screen no. 0
03 = jumps to the user menu screen no. 161
04 = deletes the
empty screen, only for user menus
05 = writes a defined string to a defined position in the display, only for user menus:
parameter 1 = X position (1…128 pixels)
parameter 2 = Y position(1…8 lines per 8 pixels)
parameter 3 = character set and representation (values can be combined):
00x1
=
"Small”
00x2
=
"Big”
00x3
=
"Fix”
00x4
=
"Bitmap”
00x5 = "Big underlined”
001x = delete line invertedly (
black bar)
002x = do not delete points 1 to X
004x = do not delete from string end to point 128
008x = shows the string invertedly
parameter 4…5 = pointer towards string
(string with "0000" completed)
06 = writes a defined "byte matrix" at a defined position in the display, only for user menus:
parameter 1 = X1 position upper left (1…128 pixels)
parameter 2 = Y1 position upper left (1…8 lines 8 pixels each)
parameter 3 = X2 position bottom right (1…128 pixels)
parameter 4 = Y2 position bottom right (1…8 lines 8 pixels each)
parameter 5…6 = pointer towards byte matrix
(1 byte corresponds to a vertical field of 8 pixels height,
bit 0 = top … Bit 7 = bottom)
07 = shows a defined arrow in the display next to the image number, only for user menus:
parameter = 0001
parameter = 0002
parameter = 0003
+
-- continued on the following page --
