T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
184
show storm-control
Description
The
show storm-control
command is used to display the storm-control
information of an Ethernet port.
Syntax
show storm-control
[
interface
{
fastEthernet
port
|
gigabitEthernet
port |
ten-gigabitEthernet
port
} ]
Parameter
port ——
The Fast/Gigabit/Ten-Gigabit Ethernet port number or port list.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the storm-control information of port Gigabit Ethernet port 1/0/20:
T2700G-28TQ(config)#show storm-control interface gigabitEthernet
1/0/20
show bandwidth
Description
The
show bandwidth
command is used to display the bandwidth-limit
information of Ethernet port.
Syntax
show bandwidth
[
interface
{
fastEthernet
port
|
gigabitEthernet
port |
ten-gigabitEthernet
port
} ]
Parameter
port ——
The Fast/Gigabit/Ten-Gigabit Ethernet port number or port list.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the bandwidth-limit information of Gigabit Ethernet port 1/0/20: