T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
318
ip igmp startup-query-interval
Description
The
ip igmp startup-query-interval
command is used to configure the interval
of Startup Query Messages that the switch sends on specified interface. To
restore to the default value on this interface, please use
no ip igmp
startup-query-interval
command.
Syntax
ip igmp startup-query-interval
interval
no ip igmp startup-query-interval
Parameter
interval
—— Specify the interval of Startup Query Messages that the switch
sends, ranging from 1 to 300 seconds. The default value is 15 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the interval of Startup Query Messages that the switch sends as 10
seconds on Interface VLAN 2:
T2700G-28TQ(config)# interface vlan
2
T2700G-28TQ(config-if)# ip igmp query-interval
10
ip igmp startup-query-count
Description
The
ip igmp startup-query-count
command is used to configure the number of
Startup Query Messages that the switch sends on specified interface. To restore
to the default value on this interface, please use
no ip igmp
startup-query-count
command.
Syntax
ip igmp startup-query-count
count
no ip igmp startup-query-count