T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
73
Syntax
lacp system-priority
pri
no lacp system-priority
Parameter
pri
—— The system priority, ranging from 0 to 65535. It is 32768 by default.
Command Mode
Global Configuration Mode
Example
Configure the LACP system priority as 1024 globally:
T2700G-28TQ(config)#lacp system-priority
1024
lacp port-priority
Description
The
lacp port-priority
command is used to configure the LACP system priority
globally. To return to the default configurations, please use
no lacp
port-priority
command.
Syntax
lacp port-priority
pri
no lacp port-priority
Parameter
pri
—— The port priority, ranging from 0 to 65535. It is 32768 by default.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Configure the LACP port priority as 1024 for Gigabit Ethernet port 1:
T2700G-28TQ(config)#interface gigabitEthernet
1/0/1
T2700G-28TQ(config-if)#lacp port-priority
1024