T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
334
Syntax
ip pim spt-threshold infinity
no ip pim spt-threshold infinity
Command Mode
Global Configuration Mode
Example
Configure all the sources never switch to the source tree:
T2700G-28TQ(config)# ip pim spt-threshold infinity
ip pim bsr-candidate interface
Description
The
ip pim bsr-candidate
command is used to configure the candidate BSR on
specified interface. To disable the candidate BSR, please use
no ip pim
bsr-candidate
command.
Syntax
ip pim bsr-candidate interface
{ { fastEthernet | gigabitEthernet |
ten-gigabitEthernet }
port |
loopback
id
|
vlan
vlan-id
} [
hash-mask-length
mask-len
] [
priority
pri
]
no ip pim bsr-candidate
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet
—— The port type of the
interface.
port
—— The port number.
id
—— The interface loopback ID.
vlan-id
——
The interface VLAN ID.
mask-len
—— Hash function mask length, ranging from 0 to 32.
pri
—— The priority of the BSR, ranging from 0 to 255.
Command Mode
Global Configuration Mode
Example
Configure the candidate BSR on interface VLAN 2: