T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
175
description
Description
The
description
command is used to add a description to the Ethernet port. To
clear the description of the corresponding port, please use
no description
command.
Syntax
description
string
no description
Parameter
string
—— Content of a port description, ranging from 1 to 16 characters.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet /
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Add a description Port #5 to Gigabit Ethernet port 1/0/5:
T2700G-28TQ(config)#interface gigabitEthernet
1/0/5
T2700G-28TQ(config-if)#description
Port#5
shutdown
Description
The
shutdown
command is used to disable an Ethernet port. To enable this port
again, please use
no shutdown
command.
Syntax
shutdown
no shutdown