S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-173
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
rmon event
rmon event
To configure Remote Monitoring (RMON) events to associate with RMON alarms, use the
rmon event
command. To remove an RMON event, use the
no
form of this command.
rmon event
event-index
[
description
string
] [
log
] [
trap
] [
owner
name
]
no rmon event
event-index
[
description
string
] [
log
] [
trap
] [
owner
name
]
Syntax Description
Command Default
None
Command Modes
Global configuration mode
Command History
Usage Guidelines
Before you use this command, you must have configured an SNMP user and enabled SNMP notifications
using the
snmp-server user
and
snmp-server enable traps
command, respectively.
You can reuse the same event with multiple RMON alarms.
Examples
This example shows how to configure an RMON event:
switch#
configure terminal
switch(config)#
rmon event 1 owner test
switch(config)#
Related Commands
event-index
Event or action that the switch takes when an alarm, rising or falling,
triggers. The
event index
range is from 0 to 65535.
description
string
(Optional) Specifies a description for the event. The description can be any
alphanumeric string.
log
(Optional) Specifies that an RMON log be generated when the event occurs.
trap
(Optional) Specifies that an SNMP trap be generated when the event occurs.
owner
name
(Optional) Specifies an owner for the alarm. The name can be any
alphanumeric string.
Release
Modification
5.0(3)U1(1)
This command was introduced.
Command
Description
copy running-config
startup-config
Saves the running configuration to the startup configuration file.
snmp-server enable
traps
Enables SNMP notifications on the switch.