S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-162
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ptp domain
ptp domain
To configure a domain number for the Precision Time Protocol (PTP) clock, use the
ptp domain
command. To remove the domain configuration for the PTP clock, use the
no
form of this command.
ptp domain
domain_number
no ptp domain
domain_number
Syntax Description
Command Default
0
Command Modes
Global configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a domain number for the PTP clock:
switch#
configure terminal
switch(config)#
ptp domain 6
switch(config)#
This example shows how to remove the PTP domain configuration:
switch#
configure terminal
switch(config)#
no ptp domain 6
switch(config)#
Related Commands
domain_number
Domain number. The range is from 0 to 128.
Release
Modification
5.0(3)U2(2)
This command was introduced.
Command
Description
feature ptp
Enables or disables PTP on the device.
ptp priority1
Configures the priority1 value to use when advertising this clock.
ptp priority2
Configures the priority2 value to use when advertising this clock.
ptp source
Configures the source IP address for all PTP packets.
show ptp brief
Displays the PTP status.
show ptp clock
Displays the properties of the local clock.