S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-48
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
destination-profile (Call Home)
The Cisco Nexus 3000 Series switch does not generate an alert if the Call Home severity level of the
alert is lower than the message severity level set for the destination profile.
lists each Call Home message level keyword.
Examples
This example shows how to create a user-defined Call Home destination profile to send Call Home
messages through e-mail:
switch#
configure terminal
switch(config)#
callhome
switch(config-callhome)#
destination-profile myProfile alert-group Configuration
email-addr myname@somecompany.com message-level 3 transport-method email
switch(config-callhome)#
Related Commands
Table 1-1
Call Home Message Severity Level
Call Home Level
Keyword
Description
9
Catastrophic
Network-wide catastrophic failure.
8
Disaster
Significant network impact.
7
Fatal
System is unusable.
6
Critical
Critical conditions that indicate that immediate
attention is needed.
5
Major
Major conditions.
4
Minor
Minor conditions.
3
Warning
Warning conditions.
2
Notification
Basic notification and informational messages.
1
Normal
Normal event signifying return to normal state.
0
Debugging
Debugging messages.
Command
Description
callhome
Configures a Call Home service.
copy running-config
startup-config
Saves this configuration change.
show callhome
Displays Call Home configuration information.
show callhome
destination-profile
Displays Call Home information for a destination profile.