S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-126
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mpls strip label-age
mpls strip label-age
To define the amount of time after which dynamic MPLS labels age out, use the
mpls strip label-age
command. To delete the defined age, use the
no
form of this command.
mpls strip label-age
age
no mpls strip label-age
age
Syntax Description
Command Default
None
Command Modes
Global configuration mode
Command History
Examples
This example shows how to configure label age for dynamic MPLS labels:
switch#
configure terminal
switch(config)#
mpls strip label-age 300
switch(config)#
Related Commands
age
Specifies the amount of time after which dynamic MPLS labels age out. The
value of the age can range from 1 to 10000000 seconds.
The default age is 1800 seconds.
Release
Modification
6.0(2)U2(5)
This command was introduced.
Command
Description
mpls strip
Enables the MPLS stripping feature.
clear mpls strip label
dynamic
Clears dynamic label entries.
mpls strip label
Adds or deletes static MPLS labels.
mpls strip dest-mac
Configures the destination MAC address for stripped egress frames.
show mpls strip labels
Displays MPLS label configuration.