S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-165
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ptp source
ptp source
To configure the global source for all the Precision Time Protocol (PTP) packets, use the
ptp source
command. To remove the global source for PTP packets, use the
no
form of this command.
ptp source
ip_address
[
vrf
{
vrf-name
|
management
]
no ptp source
ip_address
[
vrf
{
vrf-name
|
management
]
Syntax Description
Command Default
None
Command Modes
Global configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the global source for all the PTP packets:
switch#
configure terminal
switch(config)#
ptp source 192.0.1.1
switch(config)#
This example shows how to remove the global source configuration for all the PTP packets:
switch#
configure terminal
switch(config)#
no ptp source 192.0.1.1
switch(config)#
Related Commands
ip_address
IPv4 address of the source.
vrf
Specifies the virtual routing and forwarding (VRF) instance.
vrf-name
Name of the VRF. The name can be a maximum of 32 alphanumeric
characters and is case sensitive.
management
Specifies the management VRF.
Release
Modification
5.0(3)U2(2)
This command was introduced.
Command
Description
feature ptp
Enables or disables PTP on the device.
ptp domain
Configures the domain number to use for this clock.
ptp priority1
Configures the priority1 value to use when advertising this clock.
ptp priority2
Configures the priority2 value to use when advertising this clock.