Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-9
192.168.0.0/24 Direct 0 0 192.168.0.136 Vlan1
192.168.0.136/32 Direct 0 0 127.0.0.1 InLoop0
For detailed description of the above output, see
Table 1-4
.
# Display detailed information about both active and inactive routes permitted by basic
ACL 2000.
<Sysname> display ip routing-table acl 2000 verbose
Routes Matched by Access list : 2000
Summary Count : 2
Destination: 192.168.0.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 192.168.0.136 Interface: Vlan-interface1
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d04h26m42s
Tag: 0
Destination: 192.168.0.136/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d04h26m42s
Tag: 0
For the description of the command output above, see
Table 1-5
.
1.1.5 display ip routing-table ip-address
Syntax
display ip routing-table
ip-address
[
mask-length | mask
] [
longer-match
]
[
verbose
]
display ip routing-table
ip-address1
{
mask-length | mask
}
ip-address2
{
mask-length
| mask
} [
verbose
]
View
Any view
Parameters
ip-address
: Destination IP address, in dotted decimal format.
