Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-4
Field
Description
Guest VLAN
Guest VLAN configured for the port. The
value of 0 means that no guest VLAN is
configured.
Max on-line user number
Maximum number of users supported on the
port
EAPOL Packet
Number of EAPOL packets received (Tx) or
sent (Rx)
Sent EAP Request/Identity Packets
Number of EAP Request/Identity packets sent
EAP Request/Challenge Packets
Number of EAP Request/Challenge packets
sent
EAP Success Packets
Number of EAP Success packets sent
Received EAPOL Start Packets
Number of EAPOL Start packets received
EAPOL LogOff Packets
Number of EAPOL LogOff packets received
EAP Response/Identity Packets
Number of EAP Response/Identity packets
received
EAP Response/Challenge Packets
Number of EAP Response/Challenge packets
received
Error Packets
Number of erroneous packets received
Controlled User(s) amount
Number of controlled users on the port
1.1.2 dot1x
Syntax
In system view:
dot1x
[
interface
interface-list
]
undo dot1x
[
interface
interface-list
]
In Ethernet interface view:
dot1x
undo dot1x
View
System view, interface view
Parameters
interface interface-list
: Specifies a port list, which can contain multiple ports. The
interface-list
argument is in the format of
interface-list
= {
interface-type
interface-number
[
to
interface-type
interface-number
] } & <1-10>, where