Command Manual – VLAN
H3C S7500E Series Ethernet Switches
Chapter 4 GARP/GVRP Configuration Commands
4-5
4.1.5 reset garp statistics
Syntax
reset garp statistics
[
interface interface-list
]
View
User view
Parameters
interface interface-list
: Specifies an Ethernet port list, in the format of {
interface-type
interface-number
[
to
interface-type interface-number
] }&<1-10>, where &<1-10>
means that you can specify up to 10 port ranges. A port range defined without the
to
interface-type interface-number
portion comprises only one port.
Description
Use the
reset garp statistics
command to clear GARP statistics of specific or all the
ports.
Note that:
z
If the
interface interface-list
keyword-argument combination is not specified, this
command clears the GARP statistics of all the ports.
z
If the
interface interface-list
keyword-argument combination is specified, this
command clears the GARP statistics of the specified ports.
Related commands:
display gvrp statistics
.
Examples
# Clear statistics about GARP on all ports.
<Sysname> reset garp statistics
4.2 GVRP Configuration Commands
4.2.1 display gvrp local-vlan interface
Syntax
display gvrp local-vlan
interface
interface-type interface-number
View
Any view
Parameters
interface-type interface-number
: Specifies an interface by its type and number.