Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
3-28
If no OSPF process is specified, the retransmission queue information of all OSPF
processes is displayed.
Examples
# Display OSPF retransmission queue information.
<Sysname> display ospf retrans-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Retransmit List
The Router's Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2
80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
Table 3-14
Description on the fields of the
display ospf retrans-queue
command
Field
Description
The Router's Neighbor is Router ID
Neighbor router ID
Address
Neighbor interface IP address
Interface
Interface address of the router
Area Area
ID
Retransmit list
Retransmission list
Type
LSA type
LinkState ID
Link state ID
AdvRouter Advertising
router
Sequence
LSA sequence number
Age LSA
age
3.1.22 display ospf routing
Syntax
display ospf
[
process-id
]
routing
[
interface interface-type interface-number
]
[
nexthop nexthop-address
]