AWS Storage Gateway User Manual Download

Page: 203 / 438

AWS Storage Gateway User Guide

Dimensions for AWS Storage Gateway Metrics

The Amazon CloudWatch namespace for the AWS Storage Gateway service is

AWS/StorageGateway

Data is available automatically in 5-minute periods at no charge.

Dimension

Description

GatewayId

GatewayName

These dimensions ﬁlter the data you request to gateway-speciﬁc

metrics. You can identify a gateway to work by its

GatewayId

its

GatewayName

. However, note that if the name of your gateway

was changed for the time range that you are interested in viewing

metrics, then you should use the

GatewayId

Throughput and latency data of a gateway is based on all the

volumes for the gateway. For information about working with

gateway metrics, see

Measuring Performance Between Your

Gateway and AWS

VolumeId

This dimension ﬁlters the data you request to volume-speciﬁc

metrics. Identify a storage volume to work with by its

VolumeId

For information about working with volume metrics, see

Measuring

Performance Between Your Application and Gateway

Monitoring the Upload Buﬀer

You can ﬁnd information following about how to monitor a gateway's upload buﬀer and how to create

an alarm so that you get a notiﬁcation when the buﬀer exceeds a speciﬁed threshold. By using this

approach, you can proactively add buﬀer storage to a gateway before it ﬁlls completely and your storage

application stops backing up to AWS.

You monitor the upload buﬀer in the same way in both the cached volume and tape gateway

architectures. For more information, see

How AWS Storage Gateway Works (Architecture) (p. 2)

Note

The

WorkingStoragePercentUsed

WorkingStorageUsed

, and

WorkingStorageFree

metrics represent the upload buﬀer for the stored volumes setup only before the release of the

cached-volume feature in Storage Gateway. Now you should use the equivalent upload buﬀer

metrics

UploadBufferPercentUsed

UploadBufferUsed

, and

UploadBufferFree

. These

metrics apply to both gateway architectures.

Item of Interest

How to Measure

Upload buﬀer usage

Use the

UploadBufferPercentUsed

UploadBufferUsed

, and

UploadBufferFree

metrics with the

Average

statistic. For example, use the

UploadBufferUsed

with the

Average

statistic to analyze the storage usage

over a time period.

To measure upload buﬀer percent used

1. Open the CloudWatch console at

https://console.amazonaws.cn/cloudwatch/

2. Choose the

StorageGateway: Gateway Metrics

dimension, and ﬁnd the gateway that you want to

work with.

API Version 2013-06-30

196

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands