DX-1S Digital PABX - Programming Manual
5-1
5
PROGRAMMING
5.1
SYSTEM PROGRAMMING
5.1.1
PROGRAMMING ITEM 0 : PAGE PORT SERVICE STATUS
The page port in the system can be enabled and disabled. If the page port is disabled, no one can access
the page port for paging service.
Programming Command
3 * 0 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Default Value
Default = 1
5.1.2
PROGRAMMING ITEM 1 : TWO TRUNK CONFERENCE STATUS
This item is to set if the system allow the conference call to include more than one trunk party.
Command
3 * 1 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Example
3 * 1 * 0 <Enter> - the system will not allow two trunk parties in a conference call.
Default Value
Default = 1
5.1.3
PROGRAMMING ITEM 2 : CALL OVERRIDE STATUS
This item is to set if the Call Override feature is allowed to use in the system.
Command
3 * 2 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Example
3 * 2 * 0 <Enter> - the system will not allow Call Override in all extensions.
Default Value
Default = 1
5.1.4
PROGRAMMING ITEM 3 : INDICATION OF CALL WAITING STATUS
This item is to set if the system will send the call waiting tone to the extension who is engaging in a call
to indicate that another call is waiting for him/her.
Command
3 * 3 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Display Command
3 * 3 <Enter>
Example
3 * 1 * 0 <Enter> - the system will not send Call Waiting Tone.
Default Value
Default = 1
5.1.5
PROGRAMMING ITEM 4 : BUSY TONE TYPE
