DX-1S Digital PABX - Programming Manual
5-56
5.7.48 PROGRAMMING ITEM 147 : PCM OUTGOING ID PREFIX
This item is to program the prefix of calling party’s number for PCM outgoing call. In a PCM outgoing
call, if caller ID is required, the system will sent PCM Outgoing ID extension number as caller
ID.
Command
3 * 147 * Value <Enter>
where Value = 0 : Disable calling party’s number for PCM outgoing call
Value = 1 ~ 9999 : prefix of calling party’s number for PCM outgoing call
Example
3 * 147 * 272 <Enter> - to set PCM outgoing ID prefix to “272”.
Default Value
Default = 0
5.7.49 PROGRAMMING ITEM 148 : ACCOUNT CODE TIMEOUT
This item is to program the time to clear account code setting after the first on-hook.
When a user using the account code and password to override his / her dialing class to make an outgoing
call, the override feature will maintain a period of time after the first on-hook. The period of time is the
Account Code Timeout in minutes. Within the timeout period, user can dial “##00” to terminate the
timeout period immediately.
Command
3 * 148 * Value <Enter>
where Value = 0 : account code setting will clear immediately after first on-hook
Value = 1 ~ 255 (minutes) : account code setting will clear after timeout
Example
3 * 148 * 3 <Enter> - to set the Account Code Timeout to 3 minutes.
Default Value
Default = 0
Related Topic
1.
Programming Item 107 - Account Number Dialing Class
2.
Programming Item 108 - Account Password Assignment
5.7.50 PROGRAMMING ITEM 149 : CALL TIME
This item is to program the maximum call time limitation of local outgoing call. When Call Time
limitation is applied, the maximum duration of local outgoing call cannot exceed the limit. Call Time is a
system wide parameter, it should work with Extension Feature Class – Feature number 23 to selective
limit individual extension.
Command
3 * 149 * Value <Enter>
where Value = 0 : Disable call time limitation
Value = 1~ 255 : Call time (minutes)
Example
3 * 149 * 15 <Enter> - to set the Call Time limitation to 15 minutes.
Condition
If an extension is assigned to the Extension Feature Class – Feature number 23 = 0, the maximum local
outgoing call duration is limited according to Call Time Programming.
If an extension is assigned to the Extension Feature Class – Feature number 23 = 1, there is no limit to
the outgoing call duration.
Call Time only limit the local outing (loop start) call and it has no effect on IDD and LDD calls.
Default Value
Default = 0
5.7.51 PROGRAMMING ITEM 150 : FLEXIBLE INTERCOM PREFIX
