DX-1S Digital PABX - Programming Manual
5-16
5.1.57 PROGRAMMING ITEM 56 : INTERCOM CALL WAITING TIMEOUT
This item is to program the timeout value of intercom call waiting operation. This value will apply to all
extension numbers with the feature Intercom Call Waiting enabled.
For a intercom call and called extension is engaged, the calling extension will have ring tone heard until
timeout ( this pre-set timeout value ).
Command
3 * 56 * Value <Enter>
where Value = 1 ~ 255 timeout in seconds
Default Value
Default = 180
Example
3 * 56 * 10 <Enter> - The intercom call waiting timeout is 10.
Related Topic
1.
Programming Item 92 - Intercom Call Waiting Status
5.1.58 PROGRAMMING ITEM 57 : CONSOLE CALL WAITING BEEP STATUS
This item is to enable or disable the Call Waiting Beep on MFC-1S Console. The Call Waiting Beep
indicates that there is a call waiting for console to answer
Command
3 * 57 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Default Value
Default = 0 (disable)
Example
3 * 57 * 1 <Enter> - Console Call Waiting Beep is enabled.
Related Topic
1.
Programming Item 92 - Intercom Call Waiting Status
2.
Programming Item 94 - Camp-on Transfer Status
3.
Programming Item 110 - Console Service Status
4.
Programming Item 111 - Console Extension Assignment
5.1.59 PROGRAMMING ITEM 58 : TOLL RESTRICTION SCHEME
This item is to define the Dialing Class definition.
Toll restriction scheme. One scheme allows the system using original dialing class definition. This
feature allows the toll restriction scheme more flexible.
Command
3 * 58 * Value <Enter>
where Value = 0 : Scheme 0
Value = 1 : Scheme 1
