DX-1S Digital PABX - Programming Manual
5-51
Value = 9 : digit 9 answering
Example
3 * 135 * 3 * 2 <Enter> - to set DISA digit ‘3’ as intercom, system will receive the rest of directory
number and ring the extension.
3 * 135 * 3 * 2 *5 <Enter> - to set DISA digit ‘3’,‘4’ and ‘5’ as intercom, system will receive the rest of
directory number and ring the extension.
Condition
1.
This programming will only valid if system using flexible numbering scheme (programming item
133 = 1).
Default Value
Default: Index 0 = 0
Index 1 = 2
Index 2 = 2
Index 3 = 2
Index 4 = 2
Index 5 = 2
Index 6 = 6
Index 7 = 7
Index 8 = 8
Index 9 = 9
Related Topic
1.
Programming Item 70: DISA Digit 7 Answering
2.
Programming Item 71: DISA Digit 8 Answering
3.
Programming Item 72: DISA Digit 9 Answering
4.
Programming Item 133: Flexible Numbering Scheme
5.
Programming Item 136: Flexible Format
6.
Programming Item 137: Flexible Range Start
7.
Programming Item 138: Flexible Range Stop
5.7.37 PROGRAMMING ITEM 136 : FLEXIBLE FORMAT
This item is to program the length (number of digit) of flexible prefix number when Flexible Numbering
Plan is enabled.
Flexible prefix number is to define a range of number to be the prefix of directory number or trunk group
access code.
In a Flexible Numbering Scheme system and the first digit received is programmed as flexible prefix
number, the system will receive the whole length of flexible prefix number (number of digit = Flexible
Prefix Format) before interpret it.
The flexible number interpretation is depending on the programming setting of Flexible Range Start,
Flexible Range Stop and Flexible Intercom Prefix.
Command
3 * 136 * Value <Enter>
where Value = 2 ~ 4 :
Example
3 * 136 * 3 <Enter> - to set flexible prefix number format to 3 digits.
Default Value
Default = 2
Related Topic
1.
Programming Item 133: Flexible Numbering Scheme
2.
Programming Item 134: First Digit Type
3.
Programming Item 135: DISA Digit Type
4.
Programming Item 137: Flexible Range Start
5.
Programming Item 138: Flexible Range Stop