DX-1S Digital PABX - Programming Manual
5-32
5.6.11 PROGRAMMING ITEM 93 : DIAL TONE STATUS
This item is to enable / disable dial tone on extension.
Command
3 * 93 * Index1 * Value <Enter> or
3 * 93 * Index1 * Value * Index2 <Enter>
where Index1 = 0 ~ 239 : extension number
Index2 = 0 ~ 239 : extension number <Optional>
Value = 1 : enable, 0 : disable
Default Value
Default = 1
Example
3 * 93 * 122 * 1 <Enter> : Extension Number 122, with extension dial tone status enabled.
5.6.12 PROGRAMMING ITEM 94 : CAMP-ON TRANSFER STATUS
This item is to enable / disable Camp-on Transfer feature of the called extension.
Command
3 * 94 * Index1 * Value <Enter> or
3 * 94 * Index1 * Value * Index2 <Enter>
where Index1 = 0 ~ 239 : extension number
Index2 = 0 ~ 239 : extension number <Optional>
Value = 1 : enable, 0 : disable
Default Value
Default = 0
Example
3 * 94 * 122 * 1 <Enter> : Extension Number 122, with camp-on transfer status enabled.
5.6.13 PROGRAMMING ITEM 95 : DIGIT DELETION STATUS
This item is to set the system to ignore the first (several) digits dialed by an extension. This feature may
be used in a networking system using trunk – extension connection.
For example, DX-1S is networking with another PABX using trunk – extension connection. The other
PABX extension can call DX-1S extension by accessing a networked trunk and then dial DX-1S‘s
destination directory number. In DX-1S, the networked extension will receive the number from the
PABX and the Digit Deletion feature is able to discard any unwanted or unrelated digits and find out the
called extension.
Command
3 * 95 * Index1 * Value <Enter> or
3 * 95 * Index1 * Value * Index2 <Enter>
where Index1 = 0 ~ 239 : extension number
Index2 = 0 ~ 239 : extension number <Optional>
Value = 0 : disable
Value = 1 : enable
Default Value
Default value = 0 : disable
Related Topic
1.
Programming Item 139: Digit Deletion Format
