DX-1S Digital PABX - Programming Manual
5-4
5.1.16 PROGRAMMING ITEM 15 : NO ANSWER TIMEOUT
When an extension has set No Answer Transfer, the system will transfer the call to other extension
according to Busy And No Answer Transfer feature setting if the ringing extension has not answered the
call within No Answer Timeout value.
Command
3 * 15 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Condition
This setting works only if No Answer Transfer has been set.
Default Value
Default = 15
5.1.17 PROGRAMMING ITEM 16 : RINGING TIMEOUT
When any Extension received a call (intercom or incoming), it will ring until Ringing Timeout. When
timeout occurred, the system will return a busy tone to the caller.
Command
3 * 16 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Condition
This setting apply to all types of ringing on an extension except Busy and No Answer Transfer has been
set.
Default Value
Default = 30
5.1.18 PROGRAMMING ITEM 17 : DISA DIALING TIMEOUT
When a caller heard the DISA greeting message but do not enter any digit before timeout. The call will be
transferred to the trunk answering extension.
Command
3 * 17 * Value <Enter>
where Value = 1 ~ 25 (seconds)
Default Value
Default = 10 (seconds)
5.1.19 PROGRAMMING ITEM 18 : CALL BACK TIMEOUT
When a call is called back to an extension after Call Hold Timeout or because of transferred to an busy or
no answer extension, the call will camp on the extension if he/she is busy until Call Back Timeout is
reached and the system will terminate the call.
Command
3 * 18 * Value <Enter>
where Value = 1 ~ 100 ( 10 ~ 1000 seconds)
Default Value
Default = 30 (300 seconds)
5.1.20 PROGRAMMING ITEM 19 : CALL HOLD TIMEOUT
When a call is parked for some time over the duration of Call Hold Timeout, the system will ring the
extension who parked the call before.
Command
3 * 19 * Value <Enter>
where Value = 1 ~ 100 ( 10 ~ 1000 seconds)
Default Value
Default = 10 (100 seconds)
