DX-1S Digital PABX - Programming Manual
5-18
5.1.60 PROGRAMMING ITEM 59 : DISA WAITING TIME
The DISA Waiting Timeout is the duration which incoming DISA trunk call will wait for DVC channel
until timeout. If timeout occur, incoming trunk is answered by trunk call answering extension.
Command
3 * 59 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Default Value
Default value = 15 (seconds)
5.2 TRUNK PROGRAMMING
5.2.1
PROGRAMMING ITEM 60 : TRUNK SERVICE STATUS
This item is to program which trunk interfaces are now in use.
Command
3 * 60 * Index1 * Value <Enter> or
3 * 60 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 1 to enable the trunk
Value = 0 to disable the trunk
Example
3 * 60 * 8 * 1 <Enter> - to enable trunk 8
Default Value
Default = 1 for 1 ~ 60 trunks
5.2.2
PROGRAMMING ITEM 61 : TRUNK DIALING METHOD
This item is to program the dialing method of trunk interfaces.
Command
3 * 61 * Index1 * Value <Enter> or
3 * 61 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 1 : DTMF
Value = 0 : Pulse
Example
3 * 61 * 8 * 0 <Enter> - to set the trunk 8 to be Pulse dialing.
Default Value
Default = 1 for 1 ~ 60 trunks
5.2.3
PROGRAMMING ITEM 62 : LINE REVERSAL DETECTION
This item is to enable Line Reversal Detection for the trunk line which provide line reversal signal. The
SMDR will start and stop call timing by detecting the line reversal signal.
SMDR Call Duration = (Duration between line reversal signal detected to call disconnected)
Command
3 * 62 * Index1 * Value <Enter> or
3 * 62 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 1 : enable
Value = 0 : disable
