DX-1S Digital PABX - Programming Manual
5-42
5.7.19 PROGRAMMING ITEM 118 : FEATURE CLASS ASSIGNMENT
There are 16 feature classes in the system. Each feature class includes up to 50 features. The Feature
Class Assignment is to program which features can be used in a specified feature class.
In version 6, some features’ definition had changed and also some new features had added.
Since some features’ definition had changed, please check that they will not cause any problem with the
original programming data in upgrading the software from existing system.
Changed features:
Feature 23: Unlimited Call Time
Feature 32: Require Flash for Conference
New features:
Feature 45: Call Hold Recall (If an extension replace handset while holding a call, system will
recall the on-hook extension. Otherwise, system will terminate the held call.)
Feature 46: Dial a Trunk if Holding (Allow extension dialing trunk call while holding another
call. Otherwise, system will terminate the held call.)
Feature 47: Multi-party Conference
Feature 48: Specified Trunk Access (Access trunk by trunk number 1 ~ 60)
Feature 49: Call Monitor
Command
3 * 118 * IndexA * IndexB * Value <Enter>
where IndexA = 0 ~ 15 : feature class number
IndexB = 0 ~ 49 : feature number
Value = 1 to enable the feature in the class
Value = 0 to disable the feature in the class
Default Value
Class 0 - High Console Class : all features enable
Class 1 - General Console Class : all features except Set Day/Night Service and Call Disconnect features
Class 2 - High priority class : with Override feature
Class 3 - High feature class : no Override feature
Class 4 - High feature class : no Override feature
Class 5 - High feature class : no Override feature
Class 6 - High feature class : no Override feature
Class 7 - Medium feature class : no Call Forwarding, Do Not Disturb and Paging
Class 8 - Medium feature class : no Call Forwarding, Do Not Disturb and Paging
Class 9 - Medium feature class : no Call Forwarding, Do Not Disturb and Paging
Class 10 - Medium feature class : no Call Forwarding, Do Not Disturb and Paging
Class 11 - General feature class : no Call Splitting and Conference
Class 12 - Normal telephone feature class
Class 13 - Hotel telephone Check-in feature class
Class 14 - Hotel telephone Check-out feature class
Class 15 - No feature class extension : for answering call only
