DX-1S Digital PABX - Programming Manual
5-5
5.1.21 PROGRAMMING ITEM 20 : AUTOMATIC CALL BACK RINGING TIMEOUT
When an extension use the Automatic Call Back feature to get a trunk line or access an busy extension,
the extension will ring when the trunk line or called extension is free. If the extension do not answer the
call before Automatic Call Back Ringing Timeout is reached, the system will canceled the Automatic Call
Back setting for the extension.
Command
3 * 20 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Default Value
Default = 15 (seconds)
5.1.22 PROGRAMMING ITEM 21 : MINIMUM FLASH TIME
The Minimum Flash Time is set to match the flash generated by the telephone. The flash signal will be
considered as pulse digit “1” if it is shorter than the Minimum Flash Time. The flash signal which is
between Minimum Flash Time and Maximum Flash Time will assume as flash.
Command
3 * 21 * Value <Enter>
where Value = 2 ~ 9 (0.2 to 0.9 seconds)
Condition
1.
If the telephones have flash button, set the Minimum Flash Time shorter than the telephones' flash
time .
2.
If the telephones have no flash button, the Minimum Flash Time may set to 0.5 second.
3.
The Minimum Flash Time must set to be shorter than Maximum Flash Time.
Default Value
Default = 2 (0.2 seconds)
Related Topic
1.
Programming Item 22 - Maximum Flash Time.
5.1.23 PROGRAMMING ITEM 22 : MAXIMUM FLASH TIME
The Maximum Flash Time is set to match the flash generated by the telephone. The flash signal will be
regarded as on-hook signal if it is longer than the Maximum Flash Time. The flash signal which is
between Minimum Flash Time and Maximum Flash Time will assume as flash.
Command
3 * 22 * Value <Enter>
where Value = 3 ~ 10 (0.3 to 1 seconds)
Condition
1.
If the telephones have flash button, set the Maximum Flash Time longer than the telephones' flash
time .
2.
If the telephones have no flash button, the Maximum Flash Time may set to 0.9 second.
3.
The Maximum Flash Time must set to be longer than Minimum Flash Time.
Default Value
Default = 8 (0.8 seconds)
Related Topic
1.
Programming Item 21 - Minimum Flash Time.
5.1.24 PROGRAMMING ITEM 23 : DOOR LOCK RELAY ON TIME
This item is to set the “on” time of the Door Lock Relay. The Door Lock Relay contact will remain close
during Door Lock Relay On Time.
Command
3 * 23 * Value <Enter>
where Value = 1 ~ 25 (seconds)
Default Value
Default = 1 (seconds)