IDT Transparent Mode Operation
Error Detection and Handling
PES12N3 User Manual
9 - 4
June 7, 2006
Notes
Table 9.5 lists the error checks performed by the transaction layer for malformed TLPs. TLP error
checks are only performed when a TLP is received by the switch (i.e., by the stack associated with the port
on which the switch receives the TLP). No checks are made for malformed TLPs inside the switch.
Error Condition
PCIe Base
1.0a
Specification
Section
Action Taken
ECRC check failure
2.7.1
None. The PES12N3 does not check ECRC
for transactions that terminate in the switch.
Malformed TLP
-
Fatal error processing.
Flow control protocol error
2.6.1
Not applicable. The PES12N3 does not
check for any flow control errors.
Receiver overflow
2.6.1.2
None.
Completer abort
Completion time-out
Unsupported request
2.3.1
2.8
Not applicable. The PES12N3 never gener-
ates non-posted transactions.
Unsupported request
2.3.1
See section Switch Core Errors on page 4-
8.
Unexpected completion
2.3.2
Non-fatal error processing.
Table 9.4 Transaction Layer Errors
TLP Type
Error Check
All
LENGTH < Max_Payload_Size (i.e., MPS field in
PCIEDCTL register)
I/O read request
LENGTH = 1 (doubleword)
TC = 0,
ATTR = 0
The actual packet length is correct (4 doublewords
when CRC is present, 3doublewords otherwise)
I/O write request
LENGTH = 1 (doubleword)
TC = 0
ATTR = 0
The actual packet length is correct (5 doublewords
when CRC is present, 4 doublewords otherwise)
Configuration read request
LENGTH = 1 (doubleword)
TC = 0,
ATTR = 0
The actual packet length is correct (4 doublewords
when CRC is present, 3doublewords otherwise)
Configuration write request
LENGTH = 1 (doubleword)
TC = 0
ATTR = 0
The actual packet length is correct (5 doublewords
when CRC is present, 4 doublewords otherwise)
Table 9.5 Malformed TLP Error Checks (Part 1 of 2)
Summary of Contents for 89HPES12N3
