113
Step 1.
Prior to proceed to ONT configuration, add an ONT into the OLT configuration. For an ONT to
be added and configured, it does not need to be physically connected to the OLT. You can view the list
of inactive ONTs with the help of the
show interface ont
<gpon-port>
unactivated
command.
LTP-8X# show interface ont 0 unactivated
-----------------------------------
GPON-port 0 ONT unactivated list
-----------------------------------
##
Serial
ONT ID Channel Status
RSSI[dBm]
Version EquipmentID
1
ELTX5C00008C
n/a
0
UNACTIVATED
n/a
n/a
n/a
2
ELTX1A00001A
n/a
0
UNACTIVATED
n/a
n/a
n/a
Total ONT count: 2
Step 2.
To specify ONT settings, go to the corresponding view with the help of the
interface ont
command. Specify ONT serial number, password, or their combination.
LTP-8X# configure terminal
LTP-8X(config)# interface ont 0/0
LTP-8X(config)(if-ont-0/0)# serial ELTX5C00008C
LTP-8X(config)(if-ont-0/0)# password 0000000000
NTU-SFP-100 uses
PON-Password «
default
»
by default.
Step 3.
Apply the configuration by using the
commit
command.
LTP-8X(config)(if-ont-0/0)# do commit
Step 4.
View the ONT configuration by using the
do show interface ont
0/0
configuration
command.
LTP-8X(config)(if-ont-0/0)# do show interface ont 0/0 configuration
-----------------------------------
[ONT0/0] configuration
-----------------------------------
Description:
’’
Status:
UP
Serial:
ELTX5C00008C
Password:
’0000000000’
Fec up:
false
Downstream broadcast:
true
Ber interval:
none
Ber update period:
60
Rf port state:
disabled
Omci error tolerant:
false
Profile shaping:
shaping-00
ONT Profile Shaping 0
Profile ports:
ports-00
ONT Profile Ports 0
Profile management:
unassigned
Custom model:
none
Template:
unassigned
Summary of Contents for LTP-4X
