55
LTP-8X(config)# ip acs server login acs
LTP-8X(config)# ip acs server password acsacs
14.3.2
DHCPD Configuration
Step 1.
Start the DHCP server by using the
ip dhcp server enable
command.
LTP-8X(config)# ip dhcp server enable
Step 2.
Configure the range of IP addresses to be assigned by the server with the
ip dhcp server range
command and specify the first and the last addresses of the range:
LTP-8X(config)# ip dhcp server range 192.168.200.10 192.168.200.150
Step 3.
Set the maximum lease time, during which the server allows clients to use the addresses, with the
ip dhcp server lease-time
command:
LTP-8X(config)# ip dhcp server lease-time
Step 4.
Use the
ip dhcp server option-43
command to configure output of option 43 in the DHCP offer
packet for correct connection of ONTs to the ACS server. View general settings of ACSD and DHCPD to check
the format of the option.
LTP-8X(config)# ip dhcp server option-43
Step 5.
Check the changes by using the
do show ip acs server
command.
LTP-8X(config)# do show ip acs server
ACS server:
Enabled: true
Ip: 192.168.200.9
Port: 9595
Mask: 255.255.255.0
Vid: 200
Scheme: 'http'
Login: 'acs'
Password: 'acsacs'
External fw ip: 0.0.0.0
External fw port: 9595
Local fw port: 9696
ACS DHCP server:
Enabled: true
Max lease time: 600
Insert option 43: true
First IP: 192.168.200.10
Last IP: 192.168.200.150
DHCP option 43 (will be generated automatically):
URL: 'http://192.168.200.9:9595'
Login: 'acs'
Password: 'acsacs'
Step 6.
Apply the configuration by using the
commit
command.
LTP-8X(config)# do commit
Summary of Contents for LTP-4X
