Janu
ary 201
9
322 Legrand PDU User Guide
Setting the Inrush Guard Delay Time
This section applies to outlet-switching capable models only.
This command sets the inrush guard delay.
config:#
pdu inrushGuardDelay <timing>
Variables:
<timing> is a delay time between 100 and 100000 milliseconds.
Setting the Outlet Initialization Delay
This section applies to outlet-switching capable models only.
This command determines the outlet initialization delay timing on device startup. See
PDU
(on page 102) for
information on outlet initialization delay.
config:#
pdu outletInitializationDelayOnDeviceStartup <timing>
Variables:
<timing> is a delay time between 1 and 3600 seconds.
Specifying Non-Critical Outlets
This section applies to outlet-switching capable models only.
This command determines critical and non-critical outlets. It is associated with the load shedding mode. See
Load Shedding Mode
config:#
pdu nonCriticalOutlets <outlets1>:false;<outlets2>:true
Separate outlet numbers and their settings with a colon. Separate each "false" and "true" setting with a
semicolon.
Variables:
<outlets1> is one or multiple outlet numbers to be set as critical outlets. Use commas to separate outlet
numbers.
Use a dash for a range of consecutive outlets. For example,
3-8
represents outlets 3 to 8.
<outlets2> is one or multiple outlet numbers to be set as NON-critical outlets. Use commas to separate
outlet numbers.
Use a dash for a range of consecutive outlets. For example,
3-8
represents outlets 3 to 8.
