xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
220
DGS-3627:5#create dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Command: create dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Success.
DGS-3627:5#
delete dhcp excluded_address
Purpose
Used to delete IP addresses that have been configured as excluded
from the DHCP Server pool of addresses.
Syntax
delete dhcp excluded_address [begin_address <ipaddr>
end_address <ipaddr> | all]
Description
This command will allow the user to delete a previously set IP address,
or a range of IP addresses that are NOT to be included in the range of
IP addresses that the Switch will allot to clients requesting DHCP
service.
Parameters
begin_address <ipaddr>
−
Enter the beginning IP address of the range
of IP addresses to be deleted from the excluded IP address list, from
the DHCP pool.
end_address <ipaddr>
−
Enter the ending IP address of the range of IP
addresses to be deleted from the excluded IP address list, from the
DHCP pool.
all – Enter this command to delete all excluded IP addresses, from the
DHCP pool.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete IP addresses that have been configured as excluded from the DHCP server pool of addresses:
DGS-3627:5#delete dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Command: delete dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Success.
DGS-3627:5#
show dhcp excluded_address
Purpose
Used to display the excluded IP addresses of the DHCP server
function.
Syntax
show dhcp excluded_address
Description
This command is used to display the excluded IP addresses of the
DHCP server function.
Parameters None.
Restrictions None.
Example usage:
To display the DHCP server settings:
