xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
34
config box_id
Purpose
Used to configure box ID. Users can use this command to reassign box
IDs.
Syntax
config box_id current_box_id <value 1-12> new_box_id [auto | 1 | 2 |
3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12]
Description
This command will assign box IDs to switches in a stack.
Parameters
current_box_id
– Identifies the Switch being configured. Range is 1-12.
new_box_id
– The new ID being assigned to the Switch (box). Range is 1-
12.
•
auto
– Allows the box ID to be assigned automatically.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To change a box ID:
DGS-3627:5#config box_id current_box_id 1 new_box_id 2
Command: config box_id current_box_id 1 new_box_id 2
Success.
DGS-3627:5#
show stack_information
Purpose
Used to display the stack information table.
Syntax
show stack_information
Description
This command displays stack information.
Parameters None.
Restrictions None.
Example usage:
To display stack information:
