xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
431
DGS-3627:5#config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
enable
Success.
DGS-3627:5#
config lldp dot1_tlv_vlan_name
Purpose
Used to configure an individual port or group of ports to exclude one
or more of IEEE 802.1 organization VLAN name TLV data types from
outbound LLDP advertisements.
Syntax
config lldp ports [<portlist>|all] dot1_tlv_vlan_name [vlan [all |
<vlan_name 32> ] | vlanid <vidlist> ] [enable | disable ]
Description
This TLV optional data type indicates whether the corresponding
Local System’s VLAN name instance will be transmitted on the port. If
a port is associated with multiple VLANs, those enabled VLAN IDs will
be advertised.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
all
– Use this parameter to set all ports in the system.
dot1_tlv_vlan_name
– This TLV optional data type indicates whether
the corresponding Local System’s VLAN name instance will be
transmitted on the port. If a port is associated with multiple VLANs,
those enabled VLAN IDs will be advertised. The default state is
disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-3627:5#config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
DGS-3627:5#
