xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
69
copy
Purpose
Used to copy a file.
Syntax
copy {<drive_id>} <pathname 64> {{unit_id 1-12>} <drive_id>}
<pathname 64>
Description
This command is used to copy a file from a source location and
paste it to a host location. This command is only operable for the
storage media accessory.
Parameters
<drive_id>
– Enter the drive ID of the internal flash drive where the
file is to be copied from.
<pathname 64>
–
Enter the path and name of the file to be renamed.
unit <unit_id 1-12>
– Select the switch in the switch stack where the
firmware image is to be copied to, denoted by unit ID number.
<drive_id>
– Enter the drive ID of the internal flash drive where the
file is to be copied to.
<pathname 64>
– Enter the path and name of the file to be renamed.
Restrictions
Only Administrator and Operator-level users can issue this
command.
Example usage:
To copy a file:
DGS-3627:5#copy C:\ abc.cfg C:\ def.txt
Command: copy C:\ abc.cfg C:\ def.txt
Please wait, do not power off!
Process ......................Done.
DGS-3627:5#
show boot_file
Purpose
Used to show the currently set boot files located on the Switch.
Syntax
show boot_file {[unit <unitid 1-12> | all]}
Description
This command is used to display the name and path of the firmware
image and configuration file that have been previously set up by the
user, as the boot up files.
Parameters
unit <unit_id 1-12>
– Select the switch in the switch stack where the
boot file is located, denoted by unit ID number.
all
– Enter this parameter to display the boot files on all switches in
the switch stack.
Restrictions None.
Example usage:
To rename a file:
