logs
Use the
logs
command to modify Wireless AP logs. The
logs
command is accessible from the ap
context of the CLI.
When the system prompts you to input password, you must enter the FTP server’s password.
logs aplist | apply | collection | destination | end | exit | frequency | logout
| show
Parameters
aplist
Configures the AP list to collect logs.
apply
Applies AP log settings.
collection
Enables or disables AP log collection.
destination
Sets the AP log destination.
end
Returns to the base mode.
exit
Returns to the previous mode.
frequency
Configures AP log collection frequency per day.
logout
Logs out.
show
Displays settings.
Examples
The following example enables AP log collection:
WLC.siemens.com
:ap# logs collection enable
maintenance
The
maintenance
command allows for upgrading a Wireless AP’s software image. The
maintenance
command is accessible from the ap context of the CLI.
upgrd
Use the
upgrd
command to upgrade the Wireless AP’s software image. The
upgrd
command is
accessible from the ap:maintenance context of the CLI.
After you run the
upgrd
command to upgrade the Wireless AP’s software image, run the
apply
command.
upgrd default | control
ap Commands
logs
SCALANCE WLC711 CLI Reference Guide
100
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
