Examples
The following adds an ospfinterface with the name top1:
WLC.siemens.com
:ip:ospf:ospfinterface# add-ospf-interface top1
delete-ospf-interface
Use the
delete-ospf-interface
command to delete an OSPF interface object. The
delete
command is accessible from the ospfinterface context of the CLI.
delete-ospf-interface ospf interface name
Parameters
ospf interface name
Specifies the name of the OSPF interface to delete. The name must already be
created as a physical or b@ac topology in the topology context.
Examples
The following deletes an ospfinterface with the name you specify:
WLC.siemens.com
:ip:ospf:ospfinterface# delete-ospf-interface top1
<named-ospfinterface>
The
<named-ospfinterface>
command, where <named-ospfinterface> refers to the name of a given
ospfinterface, moves you into the ospfinterface:<named-ospfinterface> context, which contains
commands to configure the settings of the specified individual ospfinterface.
The following commands are available in the ip:ospf:ospfinterface:<named-ospfinterface> context.
•
on page 165
•
•
•
on page 166
•
•
on page 167
•
•
authkey
Use the
authkey
command to set the password used for authentication. Use the no form of the
command to clear the password.
Authentication must be configured to use a password before this command can be used. For more
information, see
authkey password
no authkey
ip Commands
delete-ospf-interface
SCALANCE WLC711 CLI Reference Guide
165
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...