blacklist-timer 900-86400
Parameters
900-86400
The maximum amount of time, in seconds, a device can be blacklisted. Valid values
are not less than 900, or greater than 86400 seconds.
Example
The following example configures blacklisting of a device to a maximum of 2000 seconds:
WLC.siemens.com
:mitigator:scprof:scp_name# blacklist-timer 2000
WLC.siemens.com
:mitigator:scprof:scp_name# apply
channels
Use the
channels
command to modify the channel list of the scan profile. The
channels
command is
accessible from the mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
channels
command, run the
apply
command to implement the change.
channels all | none | channel[, channel]
Parameters
all
Specifies that all channels be added to the scan profile list.
none
Specifies that no channels be listed in the scan profile.
channel
[,
channel
]
Specifies the channel(s) by number that are to be added to the scan profile.
They can be added individually, or listed as a comma separated list.
Usage
To delete some channels from the list, specify none, then if necessary re-add the ones you want
scanned.
Example
The following example adds all channels to the scan profile:
WLC.siemens.com
:mitigator:scprof:scp_name# channels all
WLC.siemens.com
:mitigator:scprof:scp_name# apply
The following example deletes all channels from the scan profile:
WLC.siemens.com
:mitigator:scprof:scp_name# channels none
WLC.siemens.com
:mitigator:scprof:scp_name# apply
Radar Commands
channels
SCALANCE WLC711 CLI Reference Guide
190
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...