Siemens scalance WLC711 Reference Manual Download

Page: 92 / 417

Parameters

server

The IP address of the FTP server from which Wireless AP channel and
maximum power values are uploaded.

user

The user name to access the FTP server

dir

The directory on the FTP server in which the file containing the Wireless AP
channel and maximum power values are stored.

file_name

The name of the file that contains the Wireless AP channel and maximum
power values.

Examples

The following example imports the DRM settings from an FTP server:

WLC.siemens.com

:ap# import_drm 192.168.4.163 test / exportdrm.txt

Please input password:

Attempting to download file...

SUCCESS: Download completed.

Importing 7000001222222222 - ok

Importing 0500006092051708 - ok

Importing 0500006072051287 - ok

Import DRM settings for following APs has been successful:

SN: 0500006072051287 name: 0500006072051287 radio: radio1, radio2.

SN: 0500006092051708 name: 0500006092051708 radio: radio1, radio2.

SN: 7000001222222222 name: 7000001222222222 radio: radio1, radio2.

lab-112-f:ap#

load-groups

The

load-groups

command moves you to the load-groups context, which contains commands to

configure Wireless AP load balancing groups. The

load-groups

command is accessible from the ap

context of the CLI.

The following commands are available in the ap:load-groups context:

•

create

on page 92

•

delete

•

<named-load-group>

on page 93 — See for commands in the ap:load-groups:<named-load-

group> context.

•

show

on page 99

create

Use the

create

command to create a load group with a specified type. After creating a load group,

assign a radio and a WLAN to the load group. See

assign-radio

on page 94 and

assign-wlan

on page

95.

The

create

command is accessible from the ap:load-groups context of the CLI.

create load group name | radio | client

ap Commands

load-groups

SCALANCE WLC711 CLI Reference Guide

Summary of Contents for scalance WLC711


































































































































































































































































































































































































































Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands

Siemens scalance WLC711, Reference Manual

Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands