The following example assigns a WLAN to site1 for Radio1:
WLC.siemens.com
:site:site1# assign-wlan WirelessWLAN radio1
band-preference
Use the band-preference command to enable or disable this site as a band preferencing load group.
Refer to the
Wireless User Guide
for a detailed description of radio band preferencing.
The
band-preference
command is accessible from within the site:<named-site> context.
band-preference enable | disable
Parameters
enable
|
disable
Enables or disables band preferencing for this site.
Example
The following example enables band preferencing on site1:
WLC.siemens.com
:site:site1# band-preference enable
config
Use the
config
command to configure a RADIUS server as the local authentication server for APs
assigned to this site. The
config
command is accessible from the site:<named-site> context.
config radius name [prot (CHAP|PAP|MS-CHAP|MS-CHAP2)] | exit
Parameters
radius name
Specifies the RADIUS server to be assigned to this site, and enters config mode for
the named server.
prot
CHAP
|
PAP
|
MS-CHAP
|
MS-CHAP2
Specifies the authentication protocol to be used with this RADIUS server.
Values are CHAP, PAP, MS-CHAP, and MS-CHAP2.
exit
Exits config mode.
Usage
Enter
config radius name
to enter config mode for that server. Enter
config exit
to exit config
mode.
Example
The following example assigns RADIUS server R-1 to site1, and enters config mode for R-1:
WLC.siemens.com
:site:site1# config R-1
site Commands
band-preference
SCALANCE WLC711 CLI Reference Guide
397
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
