2-2-7
．
Release synchronous run [MOUSYN]
1.
Instruction summarize
Release the synchronous motion between master axis and slave axis (or high speed count).
Release synchronous run[MOUSYN]
16-bit
32-bit
MOUSYN
Execution
condition
Rising/falling edge
Suitable
model
XDC
Hardware -
Software
-
2.
Operand
Operand
Function
Type
S
Slave axis number
16-bit constant
3.
Suitable soft component
*Note:
D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS.
M includes M, HM, SM; S includes S, HS; T includes T, HT; C includes C, HC.
MOUSYN
K1
M0
S.
●
when M0 is from OFF to ON, release the two axes synchronous running.
S: slave axis number N, the range of N is from 1 to 10;
●
please release the synchronous running when master axis and slave axis stop running.
●
MOSTOP urgent stop mode can stop the slave axis running and release the synchronous
bundling. At this time, the slave axis will urgent stop and the master slave will keep running. This
mode has speed sudden change. This method is not recommended to use regularly.
Function and action
Operan
d
System
Constant Module
D
*
FD
TD
*
CD
*
DX
DY
DM
*
DS
*
K /H
ND
QD
S
●
Word
