manualshive.com logo in svg

Freescale Semiconductor MPC5553, Reference Manual

The Freescale Semiconductor MPC5553 is a powerful microcontroller designed for automotive and industrial applications. For detailed information on how to use this product, download the Reference Manual for free from 88.208.23.73:8080. This manual provides all the necessary information to optimize the performance of your MPC5553.

Share
Download
background image

MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5

Freescale Semiconductor

1-1

 

Chapter 1  
Overview

1.1

Introduction

The MPC5553 and MPC5554 microcontrollers (MCU) are the first members of the MPC5500 family of 
next generation powertrain microcontrollers built on the Power Architecture

 technology. The MPC5500 

family contains a host processor core that complies with the Power Architecture embedded category, 
which is 100 percent user mode compatible with the original Power PC

 user instruction set architecture 

(UISA). This family of parts contains many new features coupled with high performance CMOS 
technology to provide significant performance improvement over the MPC565. 

The e200z6 CPU of the MPC5500 family is part of the family of CPU cores that implement versions built 
on the Power Architecture embedded category. This core also has additional instructions, including digital 
signal processing (DSP) instructions, beyond the classic PowerPC instruction set.

The MPC5553 and MPC5554 of the MPC5500 family have two levels of memory hierarchy. The fastest 
accesses are to the unified cache (32-kilobytes in the MPC5554, 8-kilobytes in the MPC5553). The next 
level in the hierarchy contains the 64-kilobyte internal SRAM and internal flash memory (2 MB flash in 
the MPC5554, 1.5 MB in the MPC5553). Both the internal SRAM and the flash memory can hold 
instructions and data. The external bus interface has been designed to support most of the standard 
memories used with the MPC5xx family.

The complex I/O timer functions of the MPC5500 family are performed by an enhanced time processor 
unit engines (eTPU) — two in the MPC5554, one in the MPC5553. Each eTPU engine controls 32 
hardware channels. The eTPU has been enhanced over the TPU by providing 24-bit timers, double action 
hardware channels, variable number of parameters per channel, angle clock hardware, and additional 
control and arithmetic instructions. The eTPU can be programmed using a high-level programming 
language.

The less complex timer functions of the MPC5500 family are performed by the enhanced modular 
input/output system (eMIOS). The eMIOS’ 24 hardware channels are capable of single action, double 
action, pulse width modulation (PWM) and modulus counter operation. Motor control capabilities include 
edge-aligned and center-aligned PWM.

Off-chip communication is performed by a suite of serial protocols including controller area networks 
(FlexCANs) — three FlexCANs in the MPC5554 and two in the MPC5553, an enhanced deserial/serial 
peripheral interface (DSPI) — four in the MPC5554 and three in the MPC5553, and enhanced serial 
communications interfaces (eSCIs). The DSPIs support pin reduction through hardware serialization and 
deserialization of timer channels and general-purpose input/output (GPIO) signals.

The MCU of the MPC5553 and MPC5554 has an on-chip 40-channel enhanced queued dual analog to 
digital converter (eQADC).

Summary of Contents for MPC5553

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MPC5553

A10 Harmony Controller 2000 Installation Manual preview
Harmony Controller 2000
Brand: A10 Pages: 27
Dantherm CC 3000 Manual preview
CC 3000
Brand: Dantherm Pages: 20
Full Gauge Controls MT-543Ri LOG Manual preview
MT-543Ri LOG
Brand: Full Gauge Controls Pages: 3
Sunnen HTA-2000 (2M) Manual preview
HTA-2000 (2M)
Brand: Sunnen Pages: 24
Identiv Freedom Bridge FB3 Installation Manual preview
Freedom Bridge FB3
Brand: Identiv Pages: 2
Carel EVD mini User Manual preview
EVD mini
Brand: Carel Pages: 36
H.E. Anderson Ratio Feeder J+ Advanced Series Manual preview
Ratio Feeder J+ Advanced Series
Brand: H.E. Anderson Pages: 11
VeriFone Commander Site Controller Software Installation Manual preview
Commander Site Controller
Brand: VeriFone Pages: 34
Digital View ALR-1920-120 Instructions Manual preview
ALR-1920-120
Brand: Digital View Pages: 35
Mono DELTA DEPOSITOR Operation Manual preview
DELTA DEPOSITOR
Brand: Mono Pages: 60
VARIZOOM VZ-ROCK Operating Instructions preview
VZ-ROCK
Brand: VARIZOOM Pages: 2
IEI Technology VWBOX-E133 User Manual preview
VWBOX-E133
Brand: IEI Technology Pages: 81
SONIX SN32F260 Series User Manual preview
SN32F260 Series
Brand: SONIX Pages: 141
Monosem CS 3000-16 Manual preview
CS 3000-16
Brand: Monosem Pages: 68
Genave RXC-3000 Hardware Manual preview
RXC-3000
Brand: Genave Pages: 46
Qanon VDA14 Manual preview
VDA14
Brand: Qanon Pages: 10
Aeotec GEN5 Instructions preview
GEN5
Brand: Aeotec Pages: 2
Greengate ControlKeeper 2 CK2-120-NC Installation Sheet preview
ControlKeeper 2 CK2-120-NC
Brand: Greengate Pages: 7

Brands by name

Popular brands

Load more brands