4-178
Flow-X─ Function Reference
Flow-X General functions - fxBatchTotal
fxBatchTotal
Description
The function accumulates a flow increment into a batch total. At every batch reset the current batch
total is stored into the previous value and the current value is reset to 0.
The flow increment originates from a ‘TotalizerRate’ or ‘TotalizerDelta’ function.
Inputs and outputs
Function
inputs
Remark
EU
SW tag
Range
Default
Name
Name used for tag-prefix and
retentive storage.
Increment
Increment value to be added to
the batch total.
Negative values will be ignored, so
the batch total will not decrease.
Same as
linked cell
0..1e11
Enabled
0: Disabled
1: Enabled
EN
Identificatio
n
Batch identification.
Can be any string of maximum 255
characters long.
If multiple identifications need to
be stored for future referral, e.g.
the batch number, the ship name
and the nomination number, then
the individual strings should be
concatenated with an "." character
in-between.
ID
Rollover
value
The batch total will be reset to 0
when it reaches the rollover value
Same as
input
Increment
ROVAL
0..1e15
1e12
Decimal
places
Defines the number of decimal
places for the current and previous
total output values.
-1 means full precision (no
rounding applied)
DECPLS
-1..10
-1
Function
outputs
Remark
EU
SW
tag
Alarm
Fallback
Current total
Accumulated total for the
current batch, so since the
last batch reset.
Same as input
’Increment’
CB
0
Previous total
Accumulated total for the
previous batch
Same as input
’Increment’
PB
0
Rollover flag
Flag indicating a rollover to 0.
0: Off
1: On
Note: stays 'On' for one
calculation cycle only)
0
ROALM
Summary of Contents for flow-x
Page 1: ...Function Reference Certified flow calculations Flow and batch calculations Worksheet functions...
Page 331: ...Flow X Function Reference 5 331 Flow X IO Functions fxPT100Table...
Page 349: ...Flow X Function Reference 6 349 This page is intentionally left blank for user notes...
Page 350: ...6 350 Flow X Function Reference This page is intentionally left blank for user notes...
