The custom map allows for customization of sensor data on the map. The user selects data items of interest for each
sensor type. This is recommended when the execution order of sensor types varies across inspections or when using more
than five sensors.
A system level custom map is supported for additional flexibility. When custom map is selected, a customizable space is
used in the offset range (55 to 166) on EIP Assembly 101 (0x65) registers.
Table 19: EIP Assembly Instance 101 (0x65): CUSTOM MAP
WORD #
WORD NAME
Data Type
0
Input Bits ACK Register (see
Input and Output Flags Bits
on page 115)
16-bit integer
1
Output Bits Register (see
Input and Output Flags Bits
on page 115)
16-bit integer
2-3
Error Code
32-bit integer
4-5
Inspection Number
32-bit integer
6-7
Iteration Count
32-bit integer
8-9
Pass Count
32-bit integer
10-11
Fail Count
32-bit integer
12-13
Missed Triggers
32-bit integer
14-15
Current Inspection Time
Float
16
Sensor Pass/Fail Coil
16-bit integer
17-29
reserved
16-bit integer
30-52
Inspection Name
2-Word 20-unicode chars
53-54
Frame Number
32-bit integer
55-166
Customizable Space (112 reg)
16-bit integer
167-170
reserved
16-bit integer
171
Command Status
16-bit integer
172
Command Response Int16
16-bit integer
173-174
Command Response Int32
32-bit integer
175-176
Command Response Float
Float
177-178
Command Response Length
32-bit integer
179-228
Command Response Data
100 Byte Array
229-239
reserved
16-bit integer
Configure Custom Industrial Ethernet (IE) Map
Enable the Custom Map by selecting Custom on the drop-down list.
Click on the yellow arrow button to access the Custom IE Map screen. The Custom IE Map screen allows choosing
sensor result data that appears on the customizable space.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164
113
