CLI Commands
SNMP access configuration
1082 Avaya G450 CLI Reference
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server remote-user
Use the
snmp-server remote-user
command to configure settings for a remote SNMPv3
user. If the user does not exist, it is created. Use the
no
form of the command to remove the
user from specific groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server remote-user
username engineID groupname
[auth {md5|sha}
auth-password
[priv des56
priv-password
]]
no snmp-server remote-user
username
[
groupname
]
Parameters
Parameter
Description
Possible
Values
Default
Value
username
A character string specifying the
username of this user
A string of
up to 32
characters
engineID
The remote device Engine ID for this user
groupname
A character string specifying the
groupname this user is associated with
A string of
up to 32
characters
md5
Keyword specifying to use the
MAC-MD5-96 authentication protocol
sha
Keyword specifying to use the
HMAC-SHA-96 authentication protocol
auth-password
A character string no longer than 64
characters specifying the authentication
password. An authentication password is
required if the auth keyword is used. The
minimum length is 8 characters.
priv-password
A character string no longer than 64
characters specifying the privacy
password. The minimum length is 8
characters.
Summary of Contents for G450 Manager
