CLI Commands
Object tracking
600 Avaya G450 CLI Reference
Note:
Note:
interface-keepalive bypass-logic
command is automatically appended to the
RTR configuration if you specify the next hop for the RTR probes, and
automatically removed from the configuration if you specify
no next-hop
.
Note:
Note:
When applying tracking to a static route, a PBR next hop, or the DHCP client
default route, you must specify the same next hop for the object tracker’s RTR.
Syntax
[no] next-hop interface {
interface-name
[mac-address
mac-address
] | ip
ip-address
}
Parameters
User Level
read-write
Context
rtr, rtr type
Examples
To specify the next hop for interface FastEthernet 10/2 is MAC address 00:04:d0:af:12:04:
G450-001(config-rtr icmp 1)# next-hop FastEthernet 10/2 interface-name
00:04:d0:af:12:04 mac-address
Related Commands
interface-keepalive bypass-logic
Parameter
Description
Possible Values
Default Value
interface-name
The next hop interface
mac-address
The MAC address of the
interface.
Applies to Ethernet interfaces
only:
●
FastEthernet not running
PPPoE
●
VLAN
ip-address
The next hop IP address
Summary of Contents for G450 Manager
