116
Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
Default Configuration
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
The polling time is configured with the
sntp client poll timer
Global
Configuration mode command.
Use the
sntp client enable
Interface Configuration mode command to enable
the SNTP client on a specific interface.
Example
The following example enables SNTP anycast clients.
Console(config)#
sntp anycast client enable
sntp client enable
The
sntp client enable
Global Configuration mode command enables the
Simple Network Time Protocol (SNTP) broadcast and anycast client on an
interface. Use the
no
form of this command to disable the SNTP client.
Syntax
sntp client enable
{
interface-id
}
no sntp client enable
{
interface-id
}
Parameters
interface-id
—Specifies an interface ID, which can be one of the following
types: Ethernet port, Port-channel or VLAN.
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Global Configuration mode
