120
Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
no sntp server
{
ipv4-address
|
ipv6-address
|
ipv6z-address
|
hostname
}
Parameters
•
ipv4-address
—Specifies the server IPv4 address.
•
ipv6-address
—Specifies the server IPv6 address. A Link Local address
(IPv6Z address) can be defined.
•
pv6z-address
—
Specifies the IPv6Z address to ping. The IPv6Z address
format is:
ipv6-link-local-address
}
%
{
interface-name
}. The subparameters
are:
•
ipv6-link-local-address
—Specifies the IPv6 Link Local address.
•
interface-name
—Specifies the outgoing interface name. The interface
name has the format:
vlan
{
integer
} |
ch
{
integer
} |
isatap
{
integer
}
| {
physical-port-name
}. The subparameter integer has the format:
{
decimal-digit
} | {
integer
}{
decimal-digit
}. (Range for the decimal-
digit: 0–9)
•
hostname
—Specifies the server hostname. Only translation to IPv4
addresses is supported. (Length: 1–158 characters. Maximum label length:
63 characters)
•
poll
—Enables polling.
•
key
keyid
—Specifies the Authentication key to use when sending packets
to this peer. (Range:1–4294967295)
Default Configuration
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
The
sntp unicast client enable
Global Configuration mode command
enables predefined unicast clients.
The
sntp unicast client poll
Global Configuration mode command globally
enables polling.
