IP Addressing Commands
619
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
Example
The following example defines the available name server.
Console(config)#
ip name-server
176.16.1.18
ip host
Use the
ip host
Global Configuration mode command to define the static
host name-to-address mapping in the host cache. Use the
no
form of this
command to remove the static host name-to-address mapping.
Syntax
ip host
name
address
[
address2
address3
address4
]
no ip host
name
Parameters
•
name
—Specifies the host name. (Length: 1–158 characters. Maximum
label length: 63 characters)
•
address
—Specifies the associated IP address. Up to 4 addresses can be
defined.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
Host names are restricted to the ASCII letters A through Z (case-insensitive),
the digits 0 through 9, the underscore and the hyphen. A period (.) is used to
separate labels.
Example
The following example defines a static host name-to-address mapping in the
host cache.
