726
Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
order is important. The
class-map
command and its subcommands are used
to define packet classification, marking, and aggregate policing as part of a
globally named service policy applied on a per-interface basis. If there is more
than one match statement in a match-all class map and if there is a repetitive
classification field in the participating ACLs, an error message is generated.
After entering the Quality of Service (QoS) Class-map Configuration mode,
the following configuration commands are available:
exit
: Exits the QoS Class-map Configuration mode.
match
: Configures classification criteria.
no
: Removes a match statement from a class map.
Example
The following example creates a class map called Class1 and configures it to
check that packets match all classification criteria in the class map match
statement.
Console(config)#
class-map
class1
match-all
Console(config-cmap)#
show class-map
The
show class-map
EXEC mode command displays all class maps.
Syntax
show class-map
[
class-map-name
]
Parameters
class-map-name
—Specifies the name of the class map to be displayed.
Command Mode
EXEC mode
Example
The following example displays the class map for Class1.
